![]() |
![]() |
#1 |
Senior Member
Регистрация: 19.07.2014
Сообщений: 117
Вес репутации: 0 ![]() |
![]()
Рибята имеетса проблема.Установил OpenWrt Chaos Calmer 15.05.1 / LuCI 15.05-142-gb6330a1 Release (git-15.363.78009-956be55)
Kernel Version 3.18.23 на роутер dir 300 b 7.Всё завелось нормально но имеетса проблема с usb sound (до етого работало все нормально и вдруг мне идеоту захотелось просто обновитса.)С качял прошывку, установил, настроил,.Начял ставить пакеты всё стало вроде без косяков но звук так и не завелса.пакеты ставил вот так : opkg update opkg install kmod-usb-core kmod-sound-core kmod-usb-audio kmod-usb-ohci kmod-usb2 madplay .Логи прилагаю.немогу понять в чем дело .направьте на правелный путь ато обидно раньше всё работало надо было мне полесть своим носом и всё испортить. Код HTML:
Tue Apr 19 18:52:58 2016 kern.debug kernel: [ 0.290000] alarmtimer alarmtimer: no of_node; not parsing pinctrl DT Tue Apr 19 18:52:58 2016 kern.info kernel: [ 0.290000] futex hash table entries: 256 (order: -1, 3072 bytes) Tue Apr 19 18:52:58 2016 kern.info kernel: [ 0.330000] squashfs: version 4.0 (2009/01/31) Phillip Lougher Tue Apr 19 18:52:58 2016 kern.info kernel: [ 0.340000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. Tue Apr 19 18:52:58 2016 kern.info kernel: [ 0.400000] msgmni has been set to 56 Tue Apr 19 18:52:58 2016 kern.info kernel: [ 0.410000] io scheduler noop registered Tue Apr 19 18:52:58 2016 kern.info kernel: [ 0.420000] io scheduler deadline registered (default) Tue Apr 19 18:52:58 2016 kern.debug kernel: [ 0.430000] rt2880-pinmux pinctrl: request pin 7 (io7) for pio:7 Tue Apr 19 18:52:58 2016 kern.debug kernel: [ 0.430000] rt2880-pinmux pinctrl: request pin 12 (io12) for pio:12 Tue Apr 19 18:52:58 2016 kern.info kernel: [ 0.430000] gpio-export gpio_export: 2 gpio(s) exported Tue Apr 19 18:52:58 2016 kern.info kernel: [ 0.450000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled Tue Apr 19 18:52:58 2016 kern.debug kernel: [ 0.460000] serial8250 serial8250: no of_node; not parsing pinctrl DT Tue Apr 19 18:52:58 2016 kern.debug kernel: [ 0.460000] pinctrl core: add 1 pinmux maps Tue Apr 19 18:52:58 2016 kern.debug kernel: [ 0.460000] rt2880-pinmux pinctrl: found group selector 3 for uartlite Tue Apr 19 18:52:58 2016 kern.debug kernel: [ 0.460000] rt2880-pinmux pinctrl: request pin 15 (io15) for 10000c00.uartlite Tue Apr 19 18:52:58 2016 kern.debug kernel: [ 0.460000] rt2880-pinmux pinctrl: request pin 16 (io16) for 10000c00.uartlite Tue Apr 19 18:52:58 2016 kern.info kernel: [ 0.460000] console [ttyS0] disabled Tue Apr 19 18:52:58 2016 kern.info kernel: [ 0.470000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a 16550A Tue Apr 19 18:52:58 2016 kern.info kernel: [ 0.490000] console [ttyS0] enabled Tue Apr 19 18:52:58 2016 kern.info kernel: [ 0.500000] bootconsole [early0] disabled Tue Apr 19 18:52:58 2016 kern.debug kernel: [ 0.520000] pinctrl core: add 1 pinmux maps Tue Apr 19 18:52:58 2016 kern.debug kernel: [ 0.520000] pinctrl core: add 1 pinmux maps Tue Apr 19 18:52:58 2016 kern.debug kernel: [ 0.520000] rt2880-pinmux pinctrl: found group selector 1 for spi Tue Apr 19 18:52:58 2016 kern.debug kernel: [ 0.520000] rt2880-pinmux pinctrl: found group selector 6 for spi_cs1 Tue Apr 19 18:52:58 2016 kern.debug kernel: [ 0.520000] rt2880-pinmux pinctrl: request pin 3 (io3) for 10000b00.spi Tue Apr 19 18:52:58 2016 kern.debug kernel: [ 0.520000] rt2880-pinmux pinctrl: request pin 4 (io4) for 10000b00.spi Tue Apr 19 18:52:58 2016 kern.debug kernel: [ 0.520000] rt2880-pinmux pinctrl: request pin 5 (io5) for 10000b00.spi Tue Apr 19 18:52:58 2016 kern.debug kernel: [ 0.520000] rt2880-pinmux pinctrl: request pin 6 (io6) for 10000b00.spi Tue Apr 19 18:52:58 2016 kern.debug kernel: [ 0.520000] rt2880-pinmux pinctrl: request pin 27 (io27) for 10000b00.spi Tue Apr 19 18:52:58 2016 kern.info kernel: [ 0.540000] m25p80 spi32766.0: s25fl064k (8192 Kbytes) Tue Apr 19 18:52:58 2016 kern.notice kernel: [ 0.550000] 4 ofpart partitions found on MTD device spi32766.0 Tue Apr 19 18:52:58 2016 kern.notice kernel: [ 0.560000] Creating 4 MTD partitions on "spi32766.0": Tue Apr 19 18:52:58 2016 kern.notice kernel: [ 0.570000] 0x000000000000-0x000000030000 : "u-boot" Tue Apr 19 18:52:58 2016 kern.notice kernel: [ 0.580000] 0x000000030000-0x000000040000 : "u-boot-env" Tue Apr 19 18:52:58 2016 kern.notice kernel: [ 0.600000] 0x000000040000-0x000000050000 : "factory" Tue Apr 19 18:52:58 2016 kern.notice kernel: [ 0.610000] 0x000000050000-0x000000800000 : "firmware" Tue Apr 19 18:52:58 2016 kern.notice kernel: [ 0.690000] 2 uimage-fw partitions found on MTD device firmware Tue Apr 19 18:52:58 2016 kern.notice kernel: [ 0.700000] 0x000000050000-0x000000162b02 : "kernel" Tue Apr 19 18:52:58 2016 kern.notice kernel: [ 0.720000] 0x000000162b02-0x000000800000 : "rootfs" Tue Apr 19 18:52:58 2016 kern.notice kernel: [ 0.730000] mtd: device 5 (rootfs) set to be root filesystem Tue Apr 19 18:52:58 2016 kern.notice kernel: [ 0.740000] 1 squashfs-split partitions found on MTD device rootfs Tue Apr 19 18:52:58 2016 kern.notice kernel: [ 0.750000] 0x000000390000-0x000000800000 : "rootfs_data" Tue Apr 19 18:52:58 2016 kern.info kernel: [ 0.770000] ralink_soc_eth 10100000.ethernet eth0: ralink at 0xb0100000, irq 5 Tue Apr 19 18:52:58 2016 kern.info kernel: [ 0.790000] rt2880_wdt 10000120.watchdog: Initialized Tue Apr 19 18:52:58 2016 kern.info kernel: [ 0.800000] TCP: cubic registered Tue Apr 19 18:52:58 2016 kern.info kernel: [ 0.800000] NET: Registered protocol family 17 Tue Apr 19 18:52:58 2016 kern.info kernel: [ 0.810000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. Tue Apr 19 18:52:58 2016 kern.notice kernel: [ 0.840000] Bridge firewalling registered Tue Apr 19 18:52:58 2016 kern.info kernel: [ 0.850000] 8021q: 802.1Q VLAN Support v1.8 Tue Apr 19 18:52:58 2016 kern.info kernel: [ 0.890000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. Tue Apr 19 18:52:58 2016 kern.info kernel: [ 0.910000] Freeing unused kernel memory: 136K (8030e000 - 80330000) Tue Apr 19 18:52:58 2016 user.info kernel: [ 3.820000] init: Console is alive Tue Apr 19 18:52:58 2016 user.info kernel: [ 3.830000] init: - watchdog - Tue Apr 19 18:52:58 2016 kern.info kernel: [ 6.780000] usbcore: registered new interface driver usbfs Tue Apr 19 18:52:58 2016 kern.info kernel: [ 6.790000] usbcore: registered new interface driver hub Tue Apr 19 18:52:58 2016 kern.info kernel: [ 6.800000] usbcore: registered new device driver usb Tue Apr 19 18:52:58 2016 kern.debug kernel: [ 6.830000] rt2880-pinmux pinctrl: request pin 9 (io9) for pio:9 Tue Apr 19 18:52:58 2016 kern.debug kernel: [ 6.830000] rt2880-pinmux pinctrl: request pin 14 (io14) for pio:14 Tue Apr 19 18:52:58 2016 kern.debug kernel: [ 6.830000] rt2880-pinmux pinctrl: request pin 13 (io13) for pio:13 Tue Apr 19 18:52:58 2016 user.info kernel: [ 6.870000] init: - preinit - Tue Apr 19 18:52:58 2016 kern.info kernel: [ 8.300000] rt305x-esw 10110000.esw: link changed 0x00 Tue Apr 19 18:52:58 2016 kern.notice kernel: [ 8.630000] random: mktemp urandom read with 13 bits of entropy available Tue Apr 19 18:52:58 2016 kern.info kernel: [ 9.960000] rt305x-esw 10110000.esw: link changed 0x10 Tue Apr 19 18:52:58 2016 kern.info kernel: [ 10.020000] rt305x-esw 10110000.esw: link changed 0x04 Tue Apr 19 18:52:58 2016 kern.info kernel: [ 11.650000] rt305x-esw 10110000.esw: link changed 0x14 Tue Apr 19 18:52:58 2016 kern.notice kernel: [ 12.310000] jffs2: notice: (308) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. Tue Apr 19 18:52:58 2016 user.info kernel: [ 12.350000] mount_root: switching to jffs2 overlay Tue Apr 19 18:52:58 2016 user.info kernel: [ 12.430000] procd: - early - Tue Apr 19 18:52:58 2016 user.info kernel: [ 12.440000] procd: - watchdog - Tue Apr 19 18:52:58 2016 user.info kernel: [ 13.620000] procd: - ubus - Tue Apr 19 18:52:58 2016 user.info kernel: [ 14.640000] procd: - init - Tue Apr 19 18:52:58 2016 kern.info kernel: [ 17.840000] NET: Registered protocol family 10 Tue Apr 19 18:52:58 2016 kern.info kernel: [ 17.920000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Tue Apr 19 18:52:58 2016 kern.info kernel: [ 17.940000] ehci-platform: EHCI generic platform driver Tue Apr 19 18:52:58 2016 kern.info kernel: [ 18.150000] phy phy-usbphy.0: remote usb device wakeup disabled Tue Apr 19 18:52:58 2016 kern.info kernel: [ 18.160000] phy phy-usbphy.0: UTMI 16bit 30MHz Tue Apr 19 18:52:58 2016 kern.info kernel: [ 18.170000] ehci-platform 101c0000.ehci: EHCI Host Controller Tue Apr 19 18:52:58 2016 kern.info kernel: [ 18.180000] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1 Tue Apr 19 18:52:58 2016 kern.info kernel: [ 18.200000] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000 Tue Apr 19 18:52:58 2016 kern.info kernel: [ 18.230000] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00 Tue Apr 19 18:52:58 2016 kern.debug kernel: [ 18.240000] usb usb1: no of_node; not parsing pinctrl DT Tue Apr 19 18:52:58 2016 kern.debug kernel: [ 18.240000] hub 1-0:1.0: no of_node; not parsing pinctrl DT Tue Apr 19 18:52:58 2016 kern.info kernel: [ 18.240000] hub 1-0:1.0: USB hub found Tue Apr 19 18:52:58 2016 kern.info kernel: [ 18.250000] hub 1-0:1.0: 1 port detected Tue Apr 19 18:52:58 2016 kern.info kernel: [ 18.270000] ip6_tables: (C) 2000-2006 Netfilter Core Team Tue Apr 19 18:52:58 2016 kern.info kernel: [ 18.450000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Tue Apr 19 18:52:58 2016 kern.info kernel: [ 18.470000] ohci-platform: OHCI generic platform driver Tue Apr 19 18:52:58 2016 kern.info kernel: [ 18.480000] ohci-platform 101c1000.ohci: Generic Platform OHCI controller Tue Apr 19 18:52:58 2016 kern.info kernel: [ 18.490000] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2 Tue Apr 19 18:52:58 2016 kern.info kernel: [ 18.510000] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000 Tue Apr 19 18:52:58 2016 kern.debug kernel: [ 18.580000] usb usb2: no of_node; not parsing pinctrl DT Tue Apr 19 18:52:58 2016 kern.debug kernel: [ 18.580000] hub 2-0:1.0: no of_node; not parsing pinctrl DT Tue Apr 19 18:52:58 2016 kern.info kernel: [ 18.580000] hub 2-0:1.0: USB hub found Tue Apr 19 18:52:58 2016 kern.err kernel: [ 18.590000] ehci-platform 101c0000.ehci: port 1 reset error -145 Tue Apr 19 18:52:58 2016 kern.info kernel: [ 18.610000] hub 2-0:1.0: 1 port detected Tue Apr 19 18:52:58 2016 kern.info kernel: [ 18.620000] Loading modules backported from Linux version master-2015-03-09-0-g141f155 Tue Apr 19 18:52:58 2016 kern.info kernel: [ 18.640000] Backport generated by backports.git backports-20150129-0-gdd4a670 Tue Apr 19 18:52:58 2016 kern.info kernel: [ 18.660000] ip_tables: (C) 2000-2006 Netfilter Core Team Tue Apr 19 18:52:58 2016 kern.info kernel: [ 18.700000] nf_conntrack version 0.5.0 (454 buckets, 1816 max) Tue Apr 19 18:52:58 2016 kern.info kernel: [ 18.850000] xt_time: kernel timezone is -0000 Tue Apr 19 18:52:58 2016 kern.info kernel: [ 19.040000] cfg80211: Calling CRDA to update world regulatory domain Tue Apr 19 18:52:58 2016 kern.info kernel: [ 19.100000] cfg80211: World regulatory domain updated: Tue Apr 19 18:52:58 2016 kern.info kernel: [ 19.110000] cfg80211: DFS Master region: unset Tue Apr 19 18:52:58 2016 kern.info kernel: [ 19.110000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) Tue Apr 19 18:52:58 2016 kern.info kernel: [ 19.130000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) Tue Apr 19 18:52:58 2016 kern.info kernel: [ 19.150000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) Tue Apr 19 18:52:58 2016 kern.info kernel: [ 19.170000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) Tue Apr 19 18:52:58 2016 kern.info kernel: [ 19.180000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) Tue Apr 19 18:52:58 2016 kern.info kernel: [ 19.200000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) Tue Apr 19 18:52:58 2016 kern.info kernel: [ 19.220000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) Tue Apr 19 18:52:58 2016 kern.info kernel: [ 19.240000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) Tue Apr 19 18:52:58 2016 kern.info kernel: [ 19.250000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) Tue Apr 19 18:52:58 2016 kern.info kernel: [ 19.360000] PPP generic driver version 2.4.2 Tue Apr 19 18:52:58 2016 kern.info kernel: [ 19.370000] NET: Registered protocol family 24 Tue Apr 19 18:52:58 2016 kern.info kernel: [ 19.420000] usbcore: registered new interface driver snd-usb-audio Tue Apr 19 18:52:58 2016 kern.info kernel: [ 19.470000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5350, rev 0500 detected Tue Apr 19 18:52:58 2016 kern.info kernel: [ 19.490000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5350 detected Tue Apr 19 18:52:58 2016 kern.debug kernel: [ 19.500000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Tue Apr 19 18:53:00 2016 kern.info kernel: [ 24.240000] rt305x-esw 10110000.esw: link changed 0x00 Tue Apr 19 18:53:01 2016 user.emerg syslog: 'radio0' is disabled Tue Apr 19 18:53:01 2016 user.emerg syslog: 'radio0' is disabled Tue Apr 19 18:53:02 2016 kern.info kernel: [ 25.880000] rt305x-esw 10110000.esw: link changed 0x10 Tue Apr 19 18:53:02 2016 kern.info kernel: [ 25.930000] rt305x-esw 10110000.esw: link changed 0x14 Tue Apr 19 18:53:03 2016 authpriv.info dropbear[817]: Not backgrounding Tue Apr 19 18:53:06 2016 daemon.info procd: - init complete - Tue Apr 19 18:53:07 2016 kern.info kernel: [ 31.020000] device eth0.1 entered promiscuous mode Tue Apr 19 18:53:07 2016 kern.info kernel: [ 31.030000] device eth0 entered promiscuous mode Tue Apr 19 18:53:07 2016 kern.info kernel: [ 31.070000] br-lan: port 1(eth0.1) entered forwarding state Tue Apr 19 18:53:07 2016 kern.info kernel: [ 31.080000] br-lan: port 1(eth0.1) entered forwarding state Tue Apr 19 18:53:07 2016 daemon.notice netifd: Interface 'lan' is enabled Tue Apr 19 18:53:07 2016 daemon.notice netifd: Interface 'lan' is setting up now Tue Apr 19 18:53:07 2016 daemon.notice netifd: Interface 'lan' is now up Tue Apr 19 18:53:07 2016 daemon.notice netifd: Interface 'loopback' is enabled Tue Apr 19 18:53:07 2016 daemon.notice netifd: Interface 'loopback' is setting up now Tue Apr 19 18:53:07 2016 daemon.notice netifd: Interface 'loopback' is now up Tue Apr 19 18:53:07 2016 daemon.notice netifd: Interface 'wan' is enabled Tue Apr 19 18:53:07 2016 daemon.notice netifd: Interface 'wan' is setting up now Tue Apr 19 18:53:07 2016 daemon.notice netifd: Interface 'wan6' is enabled Tue Apr 19 18:53:07 2016 daemon.notice netifd: Network device 'eth0' link is up Tue Apr 19 18:53:07 2016 daemon.notice netifd: Bridge 'br-lan' link is up Tue Apr 19 18:53:07 2016 daemon.notice netifd: Interface 'lan' has link connectivity Tue Apr 19 18:53:07 2016 daemon.notice netifd: VLAN 'eth0.1' link is up Tue Apr 19 18:53:07 2016 daemon.notice netifd: Network device 'lo' link is up Tue Apr 19 18:53:07 2016 daemon.notice netifd: Interface 'loopback' has link connectivity Tue Apr 19 18:53:07 2016 daemon.notice netifd: VLAN 'eth0.2' link is up Tue Apr 19 18:53:07 2016 daemon.notice netifd: Interface 'wan' has link connectivity Tue Apr 19 18:53:07 2016 daemon.notice netifd: Interface 'wan6' has link connectivity Tue Apr 19 18:53:07 2016 daemon.notice netifd: Interface 'wan6' is setting up now Tue Apr 19 18:53:07 2016 daemon.notice netifd: wan (928): udhcpc (v1.23.2) started Tue Apr 19 18:53:08 2016 user.notice firewall: Reloading firewall due to ifup of lan (br-lan) Tue Apr 19 18:53:08 2016 daemon.notice netifd: wan (928): Sending discover... Tue Apr 19 18:53:08 2016 daemon.notice netifd: wan (928): Sending select for 192.168.10.179... Tue Apr 19 18:53:08 2016 daemon.notice netifd: wan (928): Lease of 192.168.10.179 obtained, lease time 43200 Tue Apr 19 18:53:08 2016 daemon.notice netifd: Interface 'wan' is now up Tue Apr 19 18:53:09 2016 kern.info kernel: [ 33.080000] br-lan: port 1(eth0.1) entered forwarding state Tue Apr 19 18:53:13 2016 daemon.info dnsmasq[994]: started, version 2.73 cachesize 150 Tue Apr 19 18:53:13 2016 daemon.info dnsmasq[994]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify Tue Apr 19 18:53:13 2016 daemon.info dnsmasq[994]: DNS service limited to local subnets Tue Apr 19 18:53:13 2016 daemon.info dnsmasq-dhcp[994]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h Tue Apr 19 18:53:13 2016 daemon.info dnsmasq[994]: using local addresses only for domain lan Tue Apr 19 18:53:13 2016 daemon.info dnsmasq[994]: reading /tmp/resolv.conf.auto Tue Apr 19 18:53:13 2016 daemon.info dnsmasq[994]: using local addresses only for domain lan Tue Apr 19 18:53:13 2016 daemon.info dnsmasq[994]: using nameserver 192.168.10.1#53 Tue Apr 19 18:53:13 2016 daemon.info dnsmasq[994]: read /etc/hosts - 1 addresses Tue Apr 19 18:53:13 2016 daemon.info dnsmasq[994]: read /tmp/hosts/dhcp - 1 addresses Tue Apr 19 18:53:13 2016 daemon.info dnsmasq-dhcp[994]: read /etc/ethers - 0 addresses Tue Apr 19 18:53:15 2016 daemon.info dnsmasq-dhcp[994]: DHCPREQUEST(br-lan) 192.168.1.134 f8:d1:11:05:1a:96 Tue Apr 19 18:53:15 2016 daemon.info dnsmasq-dhcp[994]: DHCPACK(br-lan) 192.168.1.134 f8:d1:11:05:1a:96 Tue Apr 19 18:53:15 2016 user.notice firewall: Reloading firewall due to ifup of wan (eth0.2) Tue Apr 19 18:59:18 2016 kern.notice kernel: [ 73.680000] random: nonblocking pool is initialized Tue Apr 19 19:06:15 2016 kern.info kernel: [ 490.160000] rt305x-esw 10110000.esw: link changed 0x04 Tue Apr 19 19:06:17 2016 kern.info kernel: [ 492.790000] rt305x-esw 10110000.esw: link changed 0x14 Tue Apr 19 19:06:23 2016 kern.info kernel: [ 498.140000] rt305x-esw 10110000.esw: link changed 0x04 Tue Apr 19 19:06:24 2016 kern.info kernel: [ 499.820000] rt305x-esw 10110000.esw: link changed 0x14 Tue Apr 19 19:06:30 2016 kern.info kernel: [ 505.670000] rt305x-esw 10110000.esw: link changed 0x04 Tue Apr 19 19:06:32 2016 kern.info kernel: [ 507.270000] rt305x-esw 10110000.esw: link changed 0x14 Tue Apr 19 19:07:06 2016 kern.info kernel: [ 541.990000] rt305x-esw 10110000.esw: link changed 0x04 Tue Apr 19 19:07:08 2016 kern.info kernel: [ 543.630000] rt305x-esw 10110000.esw: link changed 0x14 Tue Apr 19 19:09:09 2016 kern.info kernel: [ 664.510000] rt305x-esw 10110000.esw: link changed 0x04 Tue Apr 19 19:09:12 2016 kern.info kernel: [ 667.160000] rt305x-esw 10110000.esw: link changed 0x14 Tue Apr 19 19:09:17 2016 kern.info kernel: [ 672.480000] rt305x-esw 10110000.esw: link changed 0x04 Tue Apr 19 19:09:19 2016 kern.info kernel: [ 674.100000] rt305x-esw 10110000.esw: link changed 0x14 Tue Apr 19 19:09:24 2016 kern.info kernel: [ 680.000000] rt305x-esw 10110000.esw: link changed 0x04 Tue Apr 19 19:09:26 2016 kern.info kernel: [ 681.690000] rt305x-esw 10110000.esw: link changed 0x14 Tue Apr 19 19:09:40 2016 kern.info kernel: [ 695.960000] rt305x-esw 10110000.esw: link changed 0x04 Tue Apr 19 19:09:42 2016 kern.info kernel: [ 697.570000] rt305x-esw 10110000.esw: link changed 0x14 |
![]() |
![]() |
![]() |
#2 |
Senior Member
Регистрация: 19.07.2014
Сообщений: 117
Вес репутации: 0 ![]() |
![]()
и второй
Код HTML:
[ 0.000000] Linux version 3.18.23 (buildbot@builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r47269) ) #1 Sun Jan 31 14:39:33 CET 2016 [ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) [ 0.000000] MIPS: machine is D-Link DIR-320 B1 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x01ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x01ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x01ffffff] [ 0.000000] On node 0 totalpages: 8192 [ 0.000000] free_area_init_node: node 0, pgdat 802f6290, node_mem_map 81000000 [ 0.000000] Normal zone: 64 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 8192 pages, LIFO batch:0 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2 [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 28948K/32768K available (2508K kernel code, 119K rwdata, 492K rodata, 136K init, 185K bss, 3820K reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:256 [ 0.000000] CPU Clock: 360MHz [ 0.000000] systick: running - mult: 214748, shift: 32 [ 0.010000] Calibrating delay loop... 239.61 BogoMIPS (lpj=1198080) [ 0.080000] pid_max: default: 32768 minimum: 301 [ 0.090000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.100000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.110000] pinctrl core: initialized pinctrl subsystem [ 0.120000] NET: Registered protocol family 16 [ 0.130000] rt2880-pinmux pinctrl: try to register 28 pins ... [ 0.130000] pinctrl core: registered pin 0 (io0) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 1 (io1) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 2 (io2) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 3 (io3) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 4 (io4) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 5 (io5) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 6 (io6) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 7 (io7) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 8 (io8) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 9 (io9) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 10 (io10) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 11 (io11) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 12 (io12) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 13 (io13) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 14 (io14) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 15 (io15) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 16 (io16) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 17 (io17) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 18 (io18) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 19 (io19) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 20 (io20) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 21 (io21) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 22 (io22) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 23 (io23) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 24 (io24) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 25 (io25) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 26 (io26) on rt2880-pinmux [ 0.130000] pinctrl core: registered pin 27 (io27) on rt2880-pinmux [ 0.130000] pinctrl core: add 5 pinmux maps [ 0.130000] rt2880-pinmux pinctrl: found group selector 0 for i2c [ 0.130000] rt2880-pinmux pinctrl: found group selector 4 for jtag [ 0.130000] rt2880-pinmux pinctrl: invalid group "rgmii" for function "gpio" [ 0.140000] rt2880-pinmux pinctrl: invalid group "mdio" for function "gpio" [ 0.150000] rt2880-pinmux pinctrl: found group selector 2 for uartf [ 0.150000] rt2880-pinmux pinctrl: request pin 1 (io1) for pinctrl [ 0.150000] rt2880-pinmux pinctrl: request pin 2 (io2) for pinctrl [ 0.150000] rt2880-pinmux pinctrl: request pin 17 (io17) for pinctrl [ 0.150000] rt2880-pinmux pinctrl: request pin 18 (io18) for pinctrl [ 0.150000] rt2880-pinmux pinctrl: request pin 19 (io19) for pinctrl [ 0.150000] rt2880-pinmux pinctrl: request pin 20 (io20) for pinctrl [ 0.150000] rt2880-pinmux pinctrl: request pin 21 (io21) for pinctrl [ 0.150000] rt2880-pinmux pinctrl: request pin 7 (io7) for pinctrl [ 0.150000] rt2880-pinmux pinctrl: request pin 8 (io8) for pinctrl [ 0.150000] rt2880-pinmux pinctrl: request pin 9 (io9) for pinctrl [ 0.150000] rt2880-pinmux pinctrl: request pin 10 (io10) for pinctrl [ 0.150000] rt2880-pinmux pinctrl: request pin 11 (io11) for pinctrl [ 0.150000] rt2880-pinmux pinctrl: request pin 12 (io12) for pinctrl [ 0.150000] rt2880-pinmux pinctrl: request pin 13 (io13) for pinctrl [ 0.150000] rt2880-pinmux pinctrl: request pin 14 (io14) for pinctrl [ 0.150000] rt2880-pinmux pinctrl: failed to lookup the sleep state [ 0.160000] rt2880_gpio 10000600.gpio: registering 22 gpios [ 0.170000] rt2880_gpio 10000600.gpio: registering 22 irq handlers [ 0.180000] Switched to clocksource systick [ 0.190000] NET: Registered protocol family 2 [ 0.200000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.210000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.220000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.240000] TCP: reno registered [ 0.240000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.250000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.270000] NET: Registered protocol family 1 [ 0.280000] rt-timer 10000100.timer: maximum frequency is 7324Hz [ 0.290000] alarmtimer alarmtimer: no of_node; not parsing pinctrl DT [ 0.290000] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.330000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.340000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.400000] msgmni has been set to 56 [ 0.410000] io scheduler noop registered [ 0.420000] io scheduler deadline registered (default) [ 0.430000] rt2880-pinmux pinctrl: request pin 7 (io7) for pio:7 [ 0.430000] rt2880-pinmux pinctrl: request pin 12 (io12) for pio:12 [ 0.430000] gpio-export gpio_export: 2 gpio(s) exported [ 0.450000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.460000] serial8250 serial8250: no of_node; not parsing pinctrl DT [ 0.460000] pinctrl core: add 1 pinmux maps [ 0.460000] rt2880-pinmux pinctrl: found group selector 3 for uartlite [ 0.460000] rt2880-pinmux pinctrl: request pin 15 (io15) for 10000c00.uartlite [ 0.460000] rt2880-pinmux pinctrl: request pin 16 (io16) for 10000c00.uartlite [ 0.460000] console [ttyS0] disabled [ 0.470000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a 16550A [ 0.490000] console [ttyS0] enabled [ 0.500000] bootconsole [early0] disabled [ 0.520000] pinctrl core: add 1 pinmux maps [ 0.520000] pinctrl core: add 1 pinmux maps [ 0.520000] rt2880-pinmux pinctrl: found group selector 1 for spi [ 0.520000] rt2880-pinmux pinctrl: found group selector 6 for spi_cs1 [ 0.520000] rt2880-pinmux pinctrl: request pin 3 (io3) for 10000b00.spi [ 0.520000] rt2880-pinmux pinctrl: request pin 4 (io4) for 10000b00.spi [ 0.520000] rt2880-pinmux pinctrl: request pin 5 (io5) for 10000b00.spi [ 0.520000] rt2880-pinmux pinctrl: request pin 6 (io6) for 10000b00.spi [ 0.520000] rt2880-pinmux pinctrl: request pin 27 (io27) for 10000b00.spi [ 0.540000] m25p80 spi32766.0: s25fl064k (8192 Kbytes) [ 0.550000] 4 ofpart partitions found on MTD device spi32766.0 [ 0.560000] Creating 4 MTD partitions on "spi32766.0": [ 0.570000] 0x000000000000-0x000000030000 : "u-boot" [ 0.580000] 0x000000030000-0x000000040000 : "u-boot-env" [ 0.600000] 0x000000040000-0x000000050000 : "factory" [ 0.610000] 0x000000050000-0x000000800000 : "firmware" [ 0.690000] 2 uimage-fw partitions found on MTD device firmware [ 0.700000] 0x000000050000-0x000000162b02 : "kernel" [ 0.720000] 0x000000162b02-0x000000800000 : "rootfs" [ 0.730000] mtd: device 5 (rootfs) set to be root filesystem [ 0.740000] 1 squashfs-split partitions found on MTD device rootfs [ 0.750000] 0x000000390000-0x000000800000 : "rootfs_data" [ 0.770000] ralink_soc_eth 10100000.ethernet eth0: ralink at 0xb0100000, irq 5 [ 0.790000] rt2880_wdt 10000120.watchdog: Initialized [ 0.800000] TCP: cubic registered [ 0.800000] NET: Registered protocol family 17 [ 0.810000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 0.840000] Bridge firewalling registered [ 0.850000] 8021q: 802.1Q VLAN Support v1.8 [ 0.890000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. [ 0.910000] Freeing unused kernel memory: 136K (8030e000 - 80330000) [ 3.820000] init: Console is alive [ 3.830000] init: - watchdog - [ 6.780000] usbcore: registered new interface driver usbfs [ 6.790000] usbcore: registered new interface driver hub [ 6.800000] usbcore: registered new device driver usb [ 6.830000] rt2880-pinmux pinctrl: request pin 9 (io9) for pio:9 [ 6.830000] rt2880-pinmux pinctrl: request pin 14 (io14) for pio:14 [ 6.830000] rt2880-pinmux pinctrl: request pin 13 (io13) for pio:13 [ 6.870000] init: - preinit - [ 8.300000] rt305x-esw 10110000.esw: link changed 0x00 [ 8.630000] random: mktemp urandom read with 13 bits of entropy available [ 9.960000] rt305x-esw 10110000.esw: link changed 0x10 [ 10.020000] rt305x-esw 10110000.esw: link changed 0x04 [ 11.650000] rt305x-esw 10110000.esw: link changed 0x14 [ 12.310000] jffs2: notice: (308) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 12.350000] mount_root: switching to jffs2 overlay [ 12.430000] procd: - early - [ 12.440000] procd: - watchdog - [ 13.620000] procd: - ubus - [ 14.640000] procd: - init - [ 17.840000] NET: Registered protocol family 10 [ 17.920000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 17.940000] ehci-platform: EHCI generic platform driver [ 18.150000] phy phy-usbphy.0: remote usb device wakeup disabled [ 18.160000] phy phy-usbphy.0: UTMI 16bit 30MHz [ 18.170000] ehci-platform 101c0000.ehci: EHCI Host Controller [ 18.180000] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1 [ 18.200000] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000 [ 18.230000] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00 [ 18.240000] usb usb1: no of_node; not parsing pinctrl DT [ 18.240000] hub 1-0:1.0: no of_node; not parsing pinctrl DT [ 18.240000] hub 1-0:1.0: USB hub found [ 18.250000] hub 1-0:1.0: 1 port detected [ 18.270000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 18.450000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 18.470000] ohci-platform: OHCI generic platform driver [ 18.480000] ohci-platform 101c1000.ohci: Generic Platform OHCI controller [ 18.490000] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2 [ 18.510000] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000 [ 18.580000] usb usb2: no of_node; not parsing pinctrl DT [ 18.580000] hub 2-0:1.0: no of_node; not parsing pinctrl DT [ 18.580000] hub 2-0:1.0: USB hub found [ 18.590000] ehci-platform 101c0000.ehci: port 1 reset error -145 [ 18.610000] hub 2-0:1.0: 1 port detected [ 18.620000] Loading modules backported from Linux version master-2015-03-09-0-g141f155 [ 18.640000] Backport generated by backports.git backports-20150129-0-gdd4a670 [ 18.660000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 18.700000] nf_conntrack version 0.5.0 (454 buckets, 1816 max) [ 18.850000] xt_time: kernel timezone is -0000 [ 19.040000] cfg80211: Calling CRDA to update world regulatory domain [ 19.100000] cfg80211: World regulatory domain updated: [ 19.110000] cfg80211: DFS Master region: unset [ 19.110000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 19.130000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 19.150000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 19.170000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 19.180000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 19.200000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 19.220000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 19.240000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 19.250000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 19.360000] PPP generic driver version 2.4.2 [ 19.370000] NET: Registered protocol family 24 [ 19.420000] usbcore: registered new interface driver snd-usb-audio [ 19.470000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5350, rev 0500 detected [ 19.490000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5350 detected [ 19.500000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 24.240000] rt305x-esw 10110000.esw: link changed 0x00 [ 25.880000] rt305x-esw 10110000.esw: link changed 0x10 [ 25.930000] rt305x-esw 10110000.esw: link changed 0x14 [ 31.020000] device eth0.1 entered promiscuous mode [ 31.030000] device eth0 entered promiscuous mode [ 31.070000] br-lan: port 1(eth0.1) entered forwarding state [ 31.080000] br-lan: port 1(eth0.1) entered forwarding state [ 33.080000] br-lan: port 1(eth0.1) entered forwarding state [ 73.680000] random: nonblocking pool is initialized [ 490.160000] rt305x-esw 10110000.esw: link changed 0x04 [ 492.790000] rt305x-esw 10110000.esw: link changed 0x14 [ 498.140000] rt305x-esw 10110000.esw: link changed 0x04 [ 499.820000] rt305x-esw 10110000.esw: link changed 0x14 [ 505.670000] rt305x-esw 10110000.esw: link changed 0x04 [ 507.270000] rt305x-esw 10110000.esw: link changed 0x14 [ 541.990000] rt305x-esw 10110000.esw: link changed 0x04 [ 543.630000] rt305x-esw 10110000.esw: link changed 0x14 [ 664.510000] rt305x-esw 10110000.esw: link changed 0x04 [ 667.160000] rt305x-esw 10110000.esw: link changed 0x14 [ 672.480000] rt305x-esw 10110000.esw: link changed 0x04 [ 674.100000] rt305x-esw 10110000.esw: link changed 0x14 [ 680.000000] rt305x-esw 10110000.esw: link changed 0x04 [ 681.690000] rt305x-esw 10110000.esw: link changed 0x14 [ 695.960000] rt305x-esw 10110000.esw: link changed 0x04 [ 697.570000] rt305x-esw 10110000.esw: link changed 0x14 |
![]() |
![]() |
![]() |
#3 |
Senior Member
Регистрация: 19.07.2014
Сообщений: 117
Вес репутации: 0 ![]() |
![]()
кажетса нашол проблему вот она перед самым носом предпоследняя строчка.Только вопрос отчего ета ошыбка и как от неё избавиться.
Код HTML:
[ 18.320000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 18.340000] ehci-platform: EHCI generic platform driver [ 18.550000] phy phy-usbphy.0: remote usb device wakeup disabled [ 18.560000] phy phy-usbphy.0: UTMI 16bit 30MHz [ 18.570000] ehci-platform 101c0000.ehci: EHCI Host Controller [ 18.580000] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1 [ 18.600000] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000 [ 18.630000] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00 [ 18.640000] usb usb1: no of_node; not parsing pinctrl DT [ 18.640000] hub 1-0:1.0: no of_node; not parsing pinctrl DT [ 18.640000] hub 1-0:1.0: USB hub found [ 18.650000] hub 1-0:1.0: 1 port detected [ 18.670000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 18.750000] Loading modules backported from Linux version master-2015-03-09-0-g141f155 [ 18.770000] Backport generated by backports.git backports-20150129-0-gdd4a670 [ 18.790000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 18.830000] nf_conntrack version 0.5.0 (454 buckets, 1816 max) [ 18.940000] ehci-platform 101c0000.ehci: port 1 reset error -145 [ 18.980000] xt_time: kernel timezone is -0000 |
![]() |
![]() |
![]() |
#4 |
Senior Member
Регистрация: 15.07.2014
Сообщений: 939
Вес репутации: 990 ![]() ![]() ![]() ![]() ![]() |
![]()
kmod-usb-uhci доставь
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Регистрация: 19.07.2014
Сообщений: 117
Вес репутации: 0 ![]() |
![]()
Ситуацыя таже что может бить ище?
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Регистрация: 15.07.2014
Сообщений: 939
Вес репутации: 990 ![]() ![]() ![]() ![]() ![]() |
![]()
Почитай Устанавливаем USB Sound card на OpenWrt устройства, может чего упустил, там и команды инфо о звуковухе, мож они что выдадут
|
![]() |
![]() |
![]() |
#7 |
Senior Member
Регистрация: 19.07.2014
Сообщений: 117
Вес репутации: 0 ![]() |
![]()
Всё заработало.Установил все подряд командой
Код HTML:
opkg update opkg install kmod-usb-core kmod-usb-uhci kmod-usb-ohci kmod-usb2 kmod-usb-audio kmod-sound-core kmod-sound-cs5535audio kmod-sound-i8x0 kmod-sound-soc-core madplay Код HTML:
opkg remove kmod-usb2 |
![]() |
![]() |
![]() |
Здесь присутствуют: 1 (пользователей: 0 , гостей: 1) | |
|
|